SolarLand 15W 6V Polycrystalline Solar Module

SLP015-06

New product

$52.00

Volume pricing is available on Solarland solar panels, please contact us with your project requirements

- +

 
Product information

The Solarland SLP Series Polycrystalline solar modules are manufactured using the highest quality components to ensure longer life and excellent performance.  SolarLand Polycrystalline solar modules are designed for the most rugged off-grid applications including street lights, water pumps, navigation lights, traffic signs and signals.

SolarLand model: SLP015-6
Cell type: Polycrystalline
Rated power: 15 Watt
Nominal voltage: 6 Volts

Voc: 10.8 Volts
Vpm: 8.0 Volts
Isc: 1.98 Amp
Ipm: 1.88 Amp

Length: 16.85 in
Width: 14.06 in
Weight: 4.85 lbs

Compare other Solarland panels with similar characteristics:

ModelPowerVoltageL (mm)W (mm)T (mm)
SLP010-12U10 W12 Volt35730230
SLP015-12U15 W12 Volt42835730
SLP020-12U20 W12 Volt57635730
SLP020-24U20 W24 Volt57635730
SLP020-12YA 20 W12 Volt520520NA
SLP025-1225 W12 Volt67535730
SLP030-12U30 W12 Volt54151030
SLP030-24U30 W24 Volt54151030
SLP045-12U45 W12 Volt67553430
SLP055-12U55 W12 Volt67065030

 

Solarland panels from 10W to 60W feature a standard junction box. Connections are made with screw-in copper silver-plated terminals inside the box. These boxes are rated for 6 Amps and 1000 Volts and do not include any by-pass diodes. Use the following link to learn more about the type of junction boxes featured in Solarland solar panels.

To mount the 10W, 20W or 30W solar panels on a pole or wall you can use the bracket SLB-0112 made by Solarland. The Universal Z-shape mounting bracket SLB-0102 can be used to mount any Solarland solar panel ranging from 10W to 140W on a flat surface.

About Solarland
SolarLand USA is a subsidiary of Solarland’s factory in Wuxi, China which was funded in 2003. Their USA office was stablished in Grayslake, Illinois in 2008 to better serve the American market. Their main distribution facility is located in Ontario, California. Solarland specializes in 12V and 24V solar panels for mobile, off-grid and remote applications. Their solar panels are assembled in China with non-Chinese PV cells. All their solar panels are built with high quality anodized aluminum frame and come with a 25 year standard warranty. In their Ontario warehouse, Solarland stocks large quantities of solar panels ranging from 3W to 160W to cover any of your low-power charging needs.

 
Download datasheet

Solarland 15W 6V solar panel

Specs for Solarland 15W 6V solar panel SLP015-06

Download datasheet
 
Mounting bracket guide

Solarland panel mounting brackets compatibility table:

Type:Universal flushTiltSingle armDouble armDouble armClamp styleTilt
Mounts on:Z bracketsWall & RoofWall & Side of poleWall & Side of poleWall & Side of poleWall & Side of poleWall & Roof
Material:AluminumAluminumAluminumAluminumAluminumAluminumAluminum
Model:SLB-0102SLB-0103SLB-0112SLB-0113SLB-0114SLB-0119SLB-0120
Panel Size
3WYes
5WYes
10WYesYesYes
20WYesYesYes
30WYesYes
45WYesYesYes
55WYesYesYesYes
70WYesYesYesYes
85WYesYesYes
90WYesYesYes (12M)Yes
100WYesYesYes
110WYesYesYes
120WYesYesYes
140WYesYesYes
150WYes
160WYes

 
Charge controller guide

Quick guide for selecting the right charge controller

Each time you charge deep cycle batteries with solar panels, it's necessary to use a charge controller in the circuit to protect the battery from over charging, and in some instances from over discharging. The only exception is when using solar panels smaller than 5W. Choosing the most suitable charge controller is simple and only requires two steps:

Step 1 - Voltage selection
Select a charge controller that is compatible with the system voltage. The standard configurations are 12, 24, and 48 volts. If you are wiring your batteries for 24 volts you need a charge controller that is rated at 24 volts.

Some controllers are voltage specific, meaning that the voltage cannot be changed or substituted. Other more sophisticated controllers include a voltage auto-detect feature, which allows it to be used with different voltage settings.

Step 2 - Current capacity

Select a charge controller that can handle the maximum output current of the solar panel (or solar array). The maximum possible current that a PV panel can generate is the “short circuit current,” indicated as Isc in the panel’s label or specs sheet.

It’s recommended to include a safety factor for isolated events as well. For example, a solar panel with a Isc of 7.89 amp could potentially produce an extra 25% on a sunny day with very clear snow pack. (additional light reflected off the snow). This results in a possible maximum of 9.86 amp (7.89 x 1.25 = 9.86 amp). In this case, a 10 amp charge controller would be recommended.

Below you will find a quick guide to choosing the proper charge controller for several popular solar panel sizes.

12V solar panels 5W - 45W
Phocos CM 04 Charge Controller 4A, 12V

12V solar panels up to 70W
Flexcharge PV7D Charge Controller 7A - 12V

12V solar panels up to 120W
Phocos CM 10 Charge Controller 10A, 12V
Phocos CMLup 10 Charge Controller 12/24V, 10A
Phocos ECO 10 Charge Controller 10A, 12V
Phocos ECO-N-10-T Charge Controller 10A, 12/24V

12V solar panels up to 160W
Flexcharge NC25A Charge Controller 25A – 12V
Phocos CMLup 20 Charge Controller 12/24V, 20A
Phocos ECO-N-20-T Charge Controller 10A, 12/24V

24V solar panels up to 160W
Flexcharge NC25A Charge Controller 25A – 24V
Phocos CMLup 10 Charge Controller 12/24V, 10A
Phocos ECO-N-10-T Charge Controller 10A, 12/24V

Related products

30 Other products in the same category

Menu