Outback MATE2 Flush Mount Remote Monitor and Control

MATE2

New product

$224.00

- +

 
Product information

The Outback Power’s MATE system display and controllers are complete management tools for your OutBack Power system. Through the use of a single MATE you can remotely manage and monitor multiple inverter/chargers, MX60s and any future OutBack power conversion and control products.

The Outback MATE and MATE2 are packed full of features to make system management simple. The easy-to-read 3.1" (8 cm) LCD is backlit for dark operating conditions. Four soft keys allow easy context-based navigation of menus and functions. Two hot keys give immediate access to AC and inverter functions.

A built-in clock and calendar function enables timer based programming of inverter and charger operation. This permits you to set the system to work with time-of-day power rates or to limit a generator's run time to a specific time period of the day or week. All of your settings are stored in permanent memory to eliminate the need to reprogram in the event of a system shutdown or battery replacement. The MATE and MATE2 include a RS232 port with DB9 jack for connection to the serial port of a PC computer. Through the use of optional WinVerter software you can perform such operations as data logging and graphical display of the system's operation and performance.

The Outback MATE system display and controller is surface mounted

The Outback MATE2 system is flush mountable in a wall cut-out.

Technical specifications for the Outback MATE and MATE2:
Grey MATE : Surface mount with RS232
Black MATE_B: Surface mount with RS232
Black MATE2: Flush mount without RS232
Interface Display: 3.1" (8 cm) backlit LCD - four line, 80 alpha numeric characters
Control Keypad : 6 backlit silicone keys - dedicated inverter and AC input keys
Status Indicators: Two LED Status Indicators - AC input (yellow), inverting (green)
Communication Protocol: Proprietary OutBack Multi-drop using an OutBack HUB4 or HUB10
Interconnection Cabling: Standard CAT 5 network cable with RJ45 modular jack - 10' (3 m) included
PC Computer Interface: RS232 opto-isolated DB9 jack 9600 baud serial communication
Microprocessor: 16 MHz low power consumption version
Setpoint and Data Memory: 32K non-volatile flash RAM
Clock / Calendar: On-board real time clock with battery backup
Environmental Rating: Indoor Type 1
Maximum Cable Length: 1000' (300 m)
Warranty: Standard 2 year / Optional 5 year
Shipping Weight: 1 lb (.5 kg)
Shipping Dimensions (H x W x L): 5.75 x 4.25 x 2" (15 x 11 x 5 cm)

 
Download datasheet

Outback MATE and MATE2

Specification sheet for the Outback monitor and digital display MATE and MATE2

Download datasheet

30 Other products in the same category

Menu