SolarLand Tilt Mount Kit, 45W-150W

SLB-0103

New product

$52.00

- +

 
Product information

The Solarland® SLB-0103 Tilt Mounting Kit features two folding legs for adjustable tilt angle of your solar panels. It provides all brackets and hardware to mount the panel to just about any flat surface such as RV’s, Caravans, Boats, plus small structures such as sheds and garages.

It works best with SolarLand SLP modules from 45W to 150W. The tilt kit will fit any other SolarLand panel of 675mm in width.


Mounts one solar module
Kit includes: Mounting barckets, Tilt arm and hardware
Til range: 20 to 90 deg.
Bracket material: 5052Al
Bolts material: AISI304
Wind load: 100 km/hr
Warranty: 5 year

Solarland panel mounting brackets compatibility table:

Type:Universal flushTiltSingle armDouble armDouble armClamp styleTilt
Mounts on:Z bracketsWall & RoofWall & Side of poleWall & Side of poleWall & Side of poleWall & Side of poleWall & Roof
Material:AluminumAluminumAluminumAluminumAluminumAluminumAluminum
Model:SLB-0102SLB-0103SLB-0112SLB-0113SLB-0114SLB-0119SLB-0120
Panel Size
3WYes
5WYes
10WYesYesYes
20WYesYesYes
30WYesYes
45WYesYesYes
55WYesYesYesYes
70WYesYesYes(12M)Yes (not 12M)
85WYesYesYes
90WYesYesYes (12M)Yes
100WYesYesYes
110WYesYesYes
120WYesYesYes
140WYesYesYes
150WYes
160WYes
 
Download datasheet

SolarLand Tilt Panel Mount

Specifications and installation guide for SolarLand Universal Tilt Module Mount

Download datasheet
 
Mounting bracket guide

Solarland panel mounting brackets compatibility table:

Type:Universal flushTiltSingle armDouble armDouble armClamp styleTilt
Mounts on:Z bracketsWall & RoofWall & Side of poleWall & Side of poleWall & Side of poleWall & Side of poleWall & Roof
Material:AluminumAluminumAluminumAluminumAluminumAluminumAluminum
Model:SLB-0102SLB-0103SLB-0112SLB-0113SLB-0114SLB-0119SLB-0120
Panel Size
3WYes
5WYes
10WYesYesYes
20WYesYesYes
30WYesYes
45WYesYesYes
55WYesYesYesYes
70WYesYesYesYes
85WYesYesYes
90WYesYesYes (12M)Yes
100WYesYesYes
110WYesYesYes
120WYesYesYes
140WYesYesYes
150WYes
160WYes

 
Charge controller guide

Quick guide for selecting the right charge controller

Each time you charge deep cycle batteries with solar panels, it's necessary to use a charge controller in the circuit to protect the battery from over charging, and in some instances from over discharging. The only exception is when using solar panels smaller than 5W. Choosing the most suitable charge controller is simple and only requires two steps:

Step 1 - Voltage selection
Select a charge controller that is compatible with the system voltage. The standard configurations are 12, 24, and 48 volts. If you are wiring your batteries for 24 volts you need a charge controller that is rated at 24 volts.

Some controllers are voltage specific, meaning that the voltage cannot be changed or substituted. Other more sophisticated controllers include a voltage auto-detect feature, which allows it to be used with different voltage settings.

Step 2 - Current capacity

Select a charge controller that can handle the maximum output current of the solar panel (or solar array). The maximum possible current that a PV panel can generate is the “short circuit current,” indicated as Isc in the panel’s label or specs sheet.

It’s recommended to include a safety factor for isolated events as well. For example, a solar panel with a Isc of 7.89 amp could potentially produce an extra 25% on a sunny day with very clear snow pack. (additional light reflected off the snow). This results in a possible maximum of 9.86 amp (7.89 x 1.25 = 9.86 amp). In this case, a 10 amp charge controller would be recommended.

Below you will find a quick guide to choosing the proper charge controller for several popular solar panel sizes.

12V solar panels 5W - 45W
Phocos CM 04 Charge Controller 4A, 12V

12V solar panels up to 70W
Flexcharge PV7D Charge Controller 7A - 12V

12V solar panels up to 120W
Phocos CM 10 Charge Controller 10A, 12V
Phocos CMLup 10 Charge Controller 12/24V, 10A
Phocos ECO 10 Charge Controller 10A, 12V
Phocos ECO-N-10-T Charge Controller 10A, 12/24V

12V solar panels up to 160W
Flexcharge NC25A Charge Controller 25A – 12V
Phocos CMLup 20 Charge Controller 12/24V, 20A
Phocos ECO-N-20-T Charge Controller 10A, 12/24V

24V solar panels up to 160W
Flexcharge NC25A Charge Controller 25A – 24V
Phocos CMLup 10 Charge Controller 12/24V, 10A
Phocos ECO-N-10-T Charge Controller 10A, 12/24V

6 Other products in the same category

Menu