1980W Pre-Wired Off-Grid Solar System – Schneider SW 4048 Inverter


SKU: PW48-1980-SW Category:

The 1980W pre-wired off-grid solar system comes with a Schneider SW4048 inverter/charger pre-wired with a Classic 150 charge controller to keep your 48V battery bank (included) charged at all times, either from your solar panels (included) or an AC generator (not included).

The Schneider Conext inverter charger has a 4,000W pure sine wave nominal output and is field configurable for 120 or 240 Volts AC. The battery bank is sized to accommodate charge/discharge cycles at 50% depth of discharge (DOD) and keep the batteries in a healthy state. The 1980W solar array will fully recharge the bank in one sunny day. This off-grid system allows for a larger battery bank or solar array upon request.

The Conext SW 4048 inverter in this system also operates as an AC battery charger feeding the batteries and your loads with extra power from a fuel-based generator whenever needed.

The Midnite MNE175SW E-Panel comes fully pre-wired and ready to be mounted on a wall; additionally, you will have all the system breakers, including your main 175A DC breaker, in one enclosure. In the E-Panel you will find tin plated copper bus bars and terminals for the inverter battery terminals, AC inputs, AC output, neutral, ground, PV + in, PV- in, Bat +, Bat-, and a 500 amp shunt.

The Midnite Classic MPPT charge controller comes mounted and wired to the side of the E-Panel. The E-Panels features knockouts in different locations for any additional wiring. The system also comes with a series of MNSPD surge arrestors to protect your power electronics.

This 48V 1980W pre-wired off-grid solar system includes the following:

This complete off-grid system includes MC4 output cables to wire the solar panels, and battery interconnects cables to connect your bank to the E-Panel’s DC terminals.

1,980W Solar PV array:
(6) Trina Solar 330W Monocrystalline Panel
(3) MC4 10AWG 50ft Output PV-Cable
(1) Midnite Solar MNPV3 Combiner Box
(3) Midnite 150V MNEPV15 DIN Mount 15A Breaker
Midnite Solar MNSW4048-CL150 Pre-Wired System:
(1) Midnite Solar Classic 150 MPPT Charge Controller
(1) Midnite Solar MNE175SW Wired E-Panel
(1) Schneider Conext SW4048 NA Inverter/Charger
(1) Schneider Conext System Control Panel
(1) MidNite Solar MNSW-BP Back Plate
(1) AC Bypass Assembly
(3) Midnite MNSPD300 Surge Protection Device
(1) 175A Main Battery Breaker
48V 390Ah Battery Bank:
(8) Surrette Rolls S6 L16 390Ah 6V Deep Cycle Battery
(7) 2/0 Battery Interconnect Cable 12″
(2) 2/0 Battery/Inverter Cable 60″
– This system is configured for 48V operation
– Wiring diagrams provided
– Racking is sold separately

For a customized version of this system please visit BoxedSolar.com

Complete solar systems delivered to your home


Solar Kit

The solar PV kits include the basic components such as solar panels, inverter(s) and accessories for operation. Depending on the project, it is possible that you will need additional components. All components used in the solar kits are compatible with each other and sized accordingly to ensure optimum system performance.

Surrette S6 L16 Battery Datasheet


Datasheet for Surrette S6 L16 deep cycle battery

Midnite Solar Classic Datasheet


Datasheet for Midnite Solar Classic MPPT charge controller

Conext SW Inverter Datasheet


Datasheet for Schneider Conext SW inverter/charger

Conext Control Panel Datasheet


Specifications for Schneider Conext System Control Panel

Trina Solar 330W Panel Datasheet


Specifications for Trina Solar all black monocrystalline 330W solar panel

Wiring Diagram Midnite/Schneider SW


Wiring diagram for Midnite Solar prewired E-Panel with Schneider SW inverter/charger