2400W Off-Grid Solar System with Schneider SW4048 Inverter


SKU: KIT-2400-48V Category:

Order requirement

Delivery to the continental U.S. included, restrictions may apply

This is a complete solar charging system for 48 Volt applications and 4000W nominal AC output. The classic MPPT charge controller will regulate the PV charging voltage and maintain the batteries full charge. The battery bank has been sized to accommodate charge/discharge cycles at 50% depth of discharge in order to keep the batteries in a healthy state. Larger battery bank can be configured upon request. 

The Conext SW4048 NA inverter included in this system can also be used as an AC battery charger. It is a complete and versatile inverter for off-grid  and back-up power applications. It is a pure sine wave inverter that can be set up for 120VAC or 240 VAC output. Conext inverter can operate in conjunction with fuel based generators to support larger loads or compliment the solar system when production is low.

This complete system includes a Midnite  MNE175SW E-Panel to facilitate simple and safe wiring. When using the Midnite Solar E-Panel for Schneider Conext SW inverters, the inverter is mounted directly to the right of the E-Panel. The E-panel comes with a 175 Amp breaker for the main battery circuit. It includes large tin plated copper bus bars directly connect to the inverter’s battery terminals, bus bars for AC inputs, AC output, neutral, ground, PV + in, PV- in, Bat +, Bat-, 500 amp shunt. The E-Panel has been designed to match the knockouts of the Midnite Classic controllers. The Classic SL controller provided can be easily mounted on top of the E-Panel. Please note that other circuit protection breakers required for the installation are sold separately. Surge protection using Midnite’s MNSPD arrestors can be added to the system.

This complete system includes MC4 output cable(s) to connect the solar panels to the controller terminals. Battery cables are not included, they can be purchased separately.

This 2400W 48V Off Grid System is Composed of:
(8) Canadian Solar 300W Monocrystalline Panel
(1) Midnite Classic 200 MPPT Charge Controller
(1) Midnite Wiring SW E-Panel MNE175SW
(1) Midnite MNSW-BP Mounting Back Plate
(1) Midnite MNSW-SLIDER-30 AC Bypass Assembly Kit
(1) Midnite MNEDC175 175A Main Battery Breaker
(2) Midnite MNSPD-300-AC Surge Protection Device
(1) Midnite MNSPD-300-DC Surge Protection Device
(1) Panel Mount MNEDC80 Controller Breaker
(1) Panel Mount MNEDC60-300 PV Breaker
(1) Panel Mount MNEDC30 Installer Breaker
(1) Schneider Conext SW4048 NA Inverter/Charger
(1) Schneider Conext SCP System Control Panel
(8) Trojan L16RE-A 325Ah, 6V Deep Cycle Battery
(2) MC4 10AWG 50ft Output PV-Cable

– This system is configured for 48V operation
– Freight delivery included
– Wiring diagrams provided
– Racking is not included but it can be added
– Solar panels or batteries may be substituted
– Solar panel appearance may vary from product picture

We invite you to watch the following video to learn more about the Schneider SW inverter / charger:

Please note that this is not a pre-wired system. A pre-wired and pre-assembled version of this system is also available. For more information please visit BoxedSolar.com

Complete solar systems delivered to your home


Solar Kit

The solar PV kits include the basic components such as solar panels, inverter(s) and accessories for operation. Depending on the project, it is possible that you will need additional components. All components used in the solar kits are compatible with each other and sized accordingly to ensure optimum system performance.

Trojan L16RE-A Battery


Specs for Trojan L16RE-A Deep Cycle Flooded lead-acid battery with Smart Carbon

Midnite Classic-SL Controller


Specs for Midnite Solar Classic-SL solar only MPPT charge controllers

Conext SW-NA Inverters


Specs for Schneider Conext SW-NA Inverters

Conext Control Panel


Specs for Schneider Conext System Control Panel

Canadian Solar CS6K-295MS


Specs for Canadian Solar all black monocrystalline CS6K-295MS solar panel