280W Solar Charging Kit – 12/24V


SKU: KIT-280-12/24V Category:

Use this large solar kit for charging 12-Volt or 24-Volt battery systems. The charge controller will prevent the batteries from over charging. The charge controller’s LVD (Low Voltage Disconnect) feature will disconnect all the loads when the voltage in the battery reaches a low level.

This solar kit includes mounting brackets and hardware to secure the solar modules to a wall or a pole.

The lead cables of this 140W solar module are equipped with safety MC4 connectors. This solar kit comes with a 30′ 10AWG UV resistant MC4 cable. The 30′ cable has a male MC4 connector in one end, and a female MC4 connector in the other end. The cable needs to be cut in half in order to have two 15′ cables to connect the solar modules to the charge controller.

Also included in the kit are two MC4 branch connectors that are used to connect both solar modules in parallel; increasing the current delivered by the two modules while maintaining the voltage at 12V nominal.

The solar charging kit includes:

2 x SolarLand 140 Watt 12 Volt multicrystalline solar panel (SLP140-12)

1 x Phocos 30 Amp charge controller with LVD (CMLsolid30).
2 x Wall or Pole Mounting Kit (SLB-0114)
1 x 30′ MC4 Connection Cable #10AWG
2 x MC4 Branch Connectors (Male and Female output)

Cables from the charge controller to the batteries are not included.


Solar Kit

The solar PV kits include the basic components such as solar panels, inverter(s) and accessories for operation. Depending on the project, it is possible that you will need additional components. All components used in the solar kits are compatible with each other and sized accordingly to ensure optimum system performance.