The Dingo D2020N is a fully programmable 20Amp charge controller that offers a wide range of operating voltages: 12, 24, 32, 36 or 48 Volts. It features a low voltage disconnect and can store up to 512 days of battery data. It also features an event control for the load port or voltage only. In the front of the controller you will find a back-lit LCD display that shows real time data and up to 99-days of historical data.
It is one of the few small charge controllers with auto generator start for diesel and even fuel cell generators. The Dingo controller can be used with wind and hydro systems and the terminals can be configured for a diversion load. The Dingo D2020N controller has a negative ground and built-in protection against battery or PV reversed polarity.
System voltage: 12/24/32/36/48 V (Selectable)
Max. charge/load current: 20A
Float charge: 13.0 V – 60.0 V (Adjustable)
Boost charge: 13.5 V – 66.0 V (Adjustable)
Equalization charge: 14.0 V – 68.0 V (Adjustable) (at least every 30 days)
Load disconnect voltage: 10.0 V – 50.0 V
Reconnect level: 11.0 V – 64.0 V (Adjustable)
Max. panel voltage: 20A
Battery type: Lead Acid (AGM, GEL, flooded)
Wire cross section: 6 AWG (16mm2)
Dimensions (W x H x D): 5.4 x 4.8 x 1.8 in (137 x 121 x 45 mm)
Weight: 8.6 oz (455 g)
Type of protection: IP20
The Dingo 20A charge controllers can operate solar panels up to 120W. It features a front LCD display and operates in a wide range of voltages 12/24/32/36/48V. It is rated for indoor use only and features a 20A Low Voltage Disconnect (LVD) to prevent the batteries from over discharging. For humid or corrosive environments we recommend the ECO-N-20-T providing encapsulated electronics and LVD. The CMLup20 is a more simple and economic 20A charge controller for indoor use. The CMLsolid30 is an encapsulated controller with 30A capacity ideal for larger systems.
Phocos was founded in Germany in the 1980’s. The original founders were engineers and researchers who studied renewable energy at the Ulm University of Applied Sciences. They mainly focused on off-grid applications, for use in remote areas with no connection to the electric grid. As the demand for renewable energy sources grew in remote areas, so did their range of innovations. Phocos maintains a priority to develop eco-friendly, simple to use, energy saving products that are also durable with high-end technology. Applications of their products range from rural, recreational, residential, to industrial. Phocos North America is located in Tucson, AZ. Phocos also has 12 other offices around the world.