Use the SolarLand SLB-0124 double arm adjustable mount to secure two SLP solar panels from 45W to 180W to a wall, or side-of-pole. It comes as a kit that includes hardware. Consider one mount kit for two solar panels. The tilt angle can be adjusted (4 positions) between 0 and 90 degrees.
The SLB-0123 mount is compatible with two of the following Solarland panels:
– SLP 50W-180W series U
– SLP 45W-150W series C1D2
– SLP 50W-60W series CSA
The SLB-0123 adjustable mount is also compatible with other solar panels that are 27″ (686mm) on the short side
Solarland SLB-0124 Double Arm Mount Specs:
Mount type: Side of the pole, Wall, Flat
Kit includes: Brackets and hardware
Bracket material: 5052Al
Bolt material: AISI304
Bolts supplied: M8 and M6
Wind load: 90 mph
Warranty: 5 years
Quick instructions to mount, adjust and secure the SLB-0124 to a wall, or flat surface.
First, assemble the bracket and align it with the designated holes on the solar panel frame. Use the supplied M6 bolts to secure the frame of the solar panel. Use one bolt for each corner of the panel. The fixed bracket will hold the left and right tilt arms as the second bracket will serve as the mount’s top brace. The tilt arms feature holes to adjust the angle of the assembly.
Then, mount the other two brackets to the solar panels’ exposed sides, aligning the bolts with the holes on the frame. Adjust for the desired tilt angle.
Once the assembly is complete, use at least 8 points of attachment to mount the fixed bracket to a wall or flat surface. Use steel clamps or U-bolts for mounting on a pole.