The Solarland SLP050-12U solar panel is ideal for mobile, off-grid, and remote applications with 12-Volt and 24-Volt power requirements such as DC lights, DC pumps, navigation lights, traffic signs, and signals. Solarland manufactures SLP solar panels using high-quality polycrystalline cells and materials. Their solar panels come with a 25-year warranty of 80% power output, a 10-year warranty of 90% power output, and a 2-year limited warranty of materials and workmanship.
Solarland SLP solar panels come with a UV resistant junction box featuring rust resistant terminals. Applications with solar panels under 100W require a charge controller with approximately 10 Amp charge capacity to maintain the batteries in a healthy state of charge
Solarland offer a series of mounting brackets to secure their panels to a pole, wall, or flat surface.
Specs for SolarLand SLP050-12U Solar Panel
Cell type: Polycrystalline
Rated power: 50 Watt
Nominal voltage: 12 Volts
Voc: 22.18 Volts
Vmp: 18.64 Volts
Isc: 2.85 Amp
Imp: 2.68 Amp
Length: 21.02 in
Width: 26.57 in
Weight: 10.25 lbs
Compare other Solarland panels with similar dimensions and specs:
|SLP030-12U||030011209||12 Volts||30 Watts||541 x 510 x 30 mm||8.3 lbs|
|SLP050-12U||050011209||12 Volts||50 Watts||534 x 675 x 30 mm||10 lbs|
|SLP060-12U||060011209||12 Volts||60 Watts||675 x 654 x 30 mm||12 lbs|
|SLP080-12U||080011210||12 Volts||80 Watts||774 x 675 x 30 mm||14 lbs|
|SLP090-12U||090011202||12 Volts||90 Watts||940 x 675 x 30 mm||20 lbs|
Solarland panels from 10W to 60W feature a standard junction box. Connections are made with screw-in copper silver-plated terminals inside the box. These boxes are rated for 6 Amps and 1000 Volts and do not include any by-pass diodes. Use the following link to learn more about the type of junction boxes featured in Solarland solar panels.
Charge controller Recommendation
Small applications with solar panels larger than 10W require a charge controller to regulate the charging of the battery. 10A charge controllers are well suited to operate with solar panels ranging from 45W to 120W. Some of our most popular models are the Phocos CMLup10 and Phocos ECO 10. Both controllers feature Low Voltage Disconnect (LDV) and can operate interchangeably with 12V and 24V systems. If LVD is not needed, the CM 10 can be a good fit for a small system.
You can use the SLB-0113 bracket made by Solarland for mounting the 45W, 55W or 70W solar panels on a pole or wall. The Universal Z-shape mounting bracket SLB-0102 can be used to mount any Solarland solar panel ranging from 10W to 140W on a flat surface.
To facilitate the selection process we have put together a series of complete kits that include, solar panel, charge controller, cables and mounting brackets. They are available in 12V and 24V. You can see them in the Complete Kits section.