SolarLand 20W 12V Polycrystalline Solar Module

SLP020-12U

New product

$64.00

Volume pricing is available on Solarland solar panels, please contact us with your project requirements

- +

Other products to consider

PMW charge controller

 
Product information

The Solarland SLP Series Polycrystalline solar modules are manufactured using the highest quality components to ensure longer life and excellent performance.  SolarLand Polycrystalline solar modules are designed for the most rugged off-grid applications including street lights, water pumps, navigation lights, traffic signs and signals.

SolarLand model: SLP020-12U
Cell type: Polycrystalline
Rated power: 20 Watt
Nominal voltage: 12 Volts

Voc: 21.6 Volts
Vpm: 17.2 Volts
Isc: 1.31 Amp
Ipm: 1.16 Amp

Length: 22.68 in
Width: 14.06 in
Weight: 6.17 lbs

Compare other Solarland panels with similar characteristics:

ModelPowerVoltageL (mm)W (mm)T (mm)
SLP010-12U10 W12 Volt35730230
SLP015-12U15 W12 Volt42835730
SLP020-12U20 W12 Volt57635730
SLP020-24U20 W24 Volt57635730
SLP020-12YA 20 W12 Volt520520NA
SLP025-1225 W12 Volt67535730
SLP030-12U30 W12 Volt54151030
SLP030-24U30 W24 Volt54151030
SLP045-12U45 W12 Volt67553430
SLP055-12U55 W12 Volt67065030

Solarland panels from 10W to 60W feature a standard junction box. Connections are made with screw-in copper silver-plated terminals inside the box. These boxes are rated for 6 Amps and 1000 Volts and do not include any by-pass diodes. Use the following link to learn more about the type of junction boxes featured in Solarland solar panels.

Small applications with solar panels ranging from 10W to 45W do not need very much in terms of battery charging. A small charge controller like the Phocos CM 04 would be enough to maintain the batteries in a healthy state of charge. If low voltage disconnect (LVD) is necessary, a more advanced charge controller suh as the Phocos CMLup10 can be used.

To mount the 10W, 20W or 30W solar panels on a pole or wall, you can use the bracket SLB-0112 made by Solarland. The Universal Z-shape mounting bracket SLB-0102 can be used to mount any Solarland solar panel ranging from 10W to 140W on a flat surface.

SolarLand USA is a subsidiary of Solarland’s factory in Wuxi, China which was funded in 2003. Their USA office was established in Grayslake, Illinois in 2008 to better serve the American market. Their main distribution facility is located in Ontario, California. Solarland specializes in 12V and 24V solar panels for mobile, off-grid and remote applications. Their solar panels are assembled in China with non-Chinese PV cells. All their solar panels are built with high quality anodized aluminum frame and come with a 25 year standard warranty. In their Ontario warehouse, Solarland stocks large quantities of solar panels ranging from 3W to 160W to cover any of your low-power charging needs. 

 
Download datasheet

SolarLand 20W 12V Module

Specification sheet for SolarLand 20-Watt 12-Volt polycrystalline solar module

Download datasheet
 
Mounting bracket guide

Solarland panel mounting brackets compatibility table:

Type:Universal flushTiltSingle armDouble armDouble armClamp styleTilt
Mounts on:Z bracketsWall & RoofWall & Side of poleWall & Side of poleWall & Side of poleWall & Side of poleWall & Roof
Material:AluminumAluminumAluminumAluminumAluminumAluminumAluminum
Model:SLB-0102SLB-0103SLB-0112SLB-0113SLB-0114SLB-0119SLB-0120
Panel Size
3WYes
5WYes
10WYesYesYes
20WYesYesYes
30WYesYes
45WYesYesYes
55WYesYesYesYes
70WYesYesYesYes
85WYesYesYes
90WYesYesYes (12M)Yes
100WYesYesYes
110WYesYesYes
120WYesYesYes
140WYesYesYes
150WYes
160WYes

Related products

30 Other products in the same category

Expect a call from us within 30 minutes (during business hours)

SolarLand 20W 12V Polycrystalline Solar Module

SolarLand 20W 12V Polycrystalline Solar Module

Optional - in case something goes wrong with the call

Menu