Morningstar RD-1 Relay Driver


New product


- +

Product information

Morningstar's RelayDriver is a logic module which provides high level system control functions such as high/low voltage alarms, load control and generator start. The relay controls four independent relay driver outputs by reading digital data inputs from Morningstar’s TriStar controller or by reading battery voltage when used in systems with other controllers.

Connected to a TriStar Controller:
Battery voltage, charge/load current, battery temperature, TriStar heatsink temperature, PWM duty cycle, PV/load voltage, and all TriStar alarms or faults.

Used in Systems with Other Controllers:
Battery voltage, Relay Driver temperature, input voltages from other sources.

The system designer may choose the exact relay needed for each application including a wide range of current ratings and solid state, mechanical or mercury displacement relays.

It is easy to program the Relay Driver with the included PC software via serial RS-232 port connection. Data is stored in non-volatile memory. The Relay Driver is pre-programmed with four commonly used settings.

Provides flexible parameters to control one, two or three-wire generator schemes and complete control of preheat, crank, ignition and cool-down.

Each relay driver output may be controlled directly by MODBUS commands via the RS-232 for use with PLC’s and other industrial hardware. Mounts to a DIN rail or a flat surface.
LED Indicators

Displays power and status of each channel as well as faults and data sampling intervals.

Download datasheet

Morningstar Relay Driver

Specification sheet for Morningstar RD-1 Relay Driver

Download datasheet

Related products

30 Other products in the same category

Expect a call from us within 30 minutes (during business hours)

Morningstar RD-1 Relay Driver

Morningstar RD-1 Relay Driver

Optional - in case something goes wrong with the call