1180W Off-Grid Solar System with Schneider SW2524 Inverter

This a medium size solar charging system for 24 Volt applications and 2500W nominal AC output. The classic MPPT charge controller will regulate the PV charging voltage and maintain the batteries full charge. The battery bank has been sized to accommodate charge/discharge cycles at 50% depth of discharge in order to keep the batteries in a healthy state. Larger battery banks can be configured upon request. 

The Conext SW2524 NA inverter included in this system can also be used as an AC battery charger; it is a complete and versatile inverter for off-grid  and back-up power applications. It is a pure sine wave inverter that can be set up for 120VAC or 240 VAC output. Conext inverters can operate in conjunction with fuel based generators to support larger loads or compliment the PV system when production is low.

This complete system includes a Midnite  MNE175SW E-Panel to facilitate simple and safe wiring. When using the Midnite Solar E-Panel with Schneider Conext SW inverters, the inverter is mounted directly to the right of the E-Panel. The E-panel comes with a 175 Amp breaker for the main battery circuit. It includes large tin plated copper bus bars directly connected to the inverter’s battery terminals, bus bars for AC inputs, AC output, neutral, ground, PV + in, PV- in, Bat +, Bat-, 500 Amp shunt. The E-Panel has been designed to match the knockouts of the Midnite Classic controllers. The Classic SL controller provided can be easily mounted on top of the E-Panel. Please note that other circuit protection breakers required for the installation are sold separately. Surge protection using Midnite’s MNSPD arrestors can be added to the system.

This complete system includes MC4 output cable(s) to connect the solar panels to the controller terminals. Battery cables are not included, they can be purchased separately.

This 1180W 24V Off Grid System is Composed of:
(4) Canadian Solar 295W Monocrystalline Black Panel
(1) Midnite Classic 200 MPPT Charge Controller
(1) Midnite Wiring SW E-Panel MNE175SW
(1) Midnite MNSW-BP Mounting Back Plate
(1) Midnite MNSW-SLIDER-30 AC Bypass Assembly Kit
(1) Midnite MNEDC175 175A Main Battery Breaker
(2) Midnite MNSPD-300-AC Surge Protection Device
(1) Midnite MNSPD-300-DC Surge Protection Device
(1) Panel Mount MNEDC80 Controller Breaker
(1) Panel Mount MNEDC60-300 PV Breaker
(1) Panel Mount MNEDC30 Installer Breaker
(1) Schneider Conext SW2524 NA Inverter/Charger
(1) Schneider Conext SCP System Control Panel
(4) Trojan T-145 260Ah, 6V Deep Cycle Battery
(1) MC4 10AWG 50ft Output PV-Cable

Notes:
- This system is configured for 24V operation
- Freight delivery included
- Wiring diagrams provided
- Racking is not included but it can be added
- Solar panels may be substituted with a different model

We invite you to watch the following video to learn more about the Schneider SW inverter / charger:

Please note that this is not a pre-wired system. A pre-wired and pre-assembled version of this system is also available. For more information please visit BoxedSolar.com