We will be happy to help, from product availability and shipping to technical inquiries and bulk pricing, click the button below.
This is a complete solar charging system for 48 Volt applications and 4000W nominal AC output. The classic MPPT charge controller will regulate the PV charging voltage and maintain the batteries full charge. The battery bank has been sized to accommodate charge/discharge cycles at 50% depth of discharge in order to keep the batteries in a healthy state. Larger battery bank can be configured upon request.
The Conext SW4048 NA inverter included in this system can also be used as an AC battery charger. It is a complete and versatile inverter for off-grid and back-up power applications. It is a pure sine wave inverter that can be set up for 120VAC or 240 VAC output. Conext inverter can operate in conjunction with fuel based generators to support larger loads or compliment the solar system when production is low.
This complete system includes a Midnite MNE175SW E-Panel to facilitate simple and safe wiring. When using the Midnite Solar E-Panel for Schneider Conext SW inverters, the inverter is mounted directly to the right of the E-Panel. The E-panel comes with a 175 Amp breaker for the main battery circuit. It includes large tin plated copper bus bars directly connect to the inverter’s battery terminals, bus bars for AC inputs, AC output, neutral, ground, PV + in, PV- in, Bat +, Bat-, 500 amp shunt. The E-Panel has been designed to match the knockouts of the Midnite Classic controllers. The Classic SL controller provided can be easily mounted on top of the E-Panel. Please note that other circuit protection breakers required for the installation are sold separately. Surge protection using Midnite’s MNSPD arrestors can be added to the system.
This complete system includes MC4 output cable(s) to connect the solar panels to the controller terminals. Battery cables are not included, they can be purchased separately.
This 3600W 48V Off Grid System is Composed of:
(12) Canadian Solar 300W Monocrystalline Panel
(1) Midnite Classic 200 MPPT Charge Controller
(1) Midnite Wiring SW E-Panel MNE175SW
(1) Midnite MNSW-BP Mounting Back Plate
(1) Midnite MNSW-SLIDER-30 AC Bypass Assembly Kit
(1) Midnite MNEDC175 175A Main Battery Breaker
(2) Midnite MNSPD-300-AC Surge Protection Device
(1) Midnite MNSPD-300-DC Surge Protection Device
(1) Panel Mount MNEDC80 Controller Breaker
(1) Panel Mount MNEDC60-300 PV Breaker
(1) Panel Mount MNEDC30 Installer Breaker
(1) Schneider Conext SW4048 NA Inverter/Charger
(1) Schneider Conext SCP System Control Panel
(8) Surrette S6 L16 390Ah, 6V Deep Cycle Battery
(3) MC4 10AWG 50ft Output PV-Cable
- This system is configured for 48V operation
- Freight delivery included
- Wiring diagrams provided
- Racking is not included but it can be added
- Solar panels or batteries may be substituted
- Los paneles solares o las baterías pueden ser substituidos
- La apariencia de los paneles solares puede ser diferente a la foto del producto
We invite you to watch the following video to learn more about the Schneider SW inverter / charger:
Please note that this is not a pre-wired system. A pre-wired and pre-assembled version of this system is also available. For more information please visit BoxedSolar.com
Surrette Battery specification sheet for the S6 L16 modelDownload datasheet
Specs for Midnite Solar Classic-SL solar only MPPT charge controllersDownload datasheet