Tyco SolarLok Array Output USE-2 Cable

New product

$17.00

  • 6 ft
  • 8 ft
  • 15 ft
  • 30 ft
  • 50 ft
  • 75 ft
  • 100 ft
  • 120 ft
  • 150 ft
  • 200 ft
Volume discount available in orders over 30 cables, please contact us with your project requirements

- +

 
Product information

This preassembled array output cable comes with Tyco Solarlok connectors. The cable has a male connector in one end and a female connector in the opposite end. Use these output cables at home run of a string of modules. They can also be used as an extension when PV panels in the same string are separated by a distance greater  than the panel's lead cables. These cables are compatible with combiner boxes featuring Tyco outputs.

These cables are meant to be cut, you can cut them at any point along the wire in order to have the required length of the female and male cables. For example, if you need a 15' male cable and a 35' female cable to connect the ends of your strings you need to order a 50' cable pre string; or if the distance between the combiner box and the inverter is 35', order a 70' or 75' cable.

These cables are preassembled with black #10 AWG USE-2 sunlight-resistant cable and Tyco Solarlok connectors; they are rated for 600 Volt systems.

30 Other products in the same category

Expect a call from us within 30 minutes (during business hours)

Tyco SolarLok Array Output USE-2 Cable

Tyco SolarLok Array Output USE-2 Cable

Optional - in case something goes wrong with the call

Menu